Audiovox 5BCR03 Manual de usuario descargar pdf

1 of 6

128-6997

The AX-900 Model has a configurable receiver that allows the transmitter to

be programmed to operate the Lock Unlock functions with one transmitter

button or with two transmitter buttons (separate Lock/Unlock). In addition,

the receiver also allows driver priority function. This driver priority function

takes place when ever a particular transmitter is used to unlock the vehicle

regardless of the selection of one button or two button operation.

The following indicates the receiver programmable slots.

1 Lock/Unlock or Lock

2 Unlock if Programmed

3 Trunk Release & or Remote Start (Optional on some models)

4 Auxiliary Output

5 Auxiliary Output

6 Driver 1 Priority or Sperate Output

7 Driver 2 Priority or Separate Output

Receiver channels 6 or 7 will accept the programming of transmitter

channel 1 if used as the Lock/Unlock button, or Channel 2 when separate

Lock Unlock buttons are programmed. In this way, whenever the transmit-

ter is used to unlock the vehicle, channel 6 or 7, when programmed, will

provide a pulsed ground output. This output can be connecter to the driver

priority function of the vehicle to reset preset user features. Please consult

with your installation centers technician to see if this feature is available in

your vehicle.

NOTE: A total of 4 transmitters may be programmed into any receiver

channel.

Force programming a transmitter, removing a transmitter, or reprioritizing a

transmitter is covered later in this manual.

Also, if you do not program a transmitter button into channel 2 which is the

separate unlock/disarm channel, then whatever button is programmed into

channel 1 will serve as both lock/arm & unlock/disarm.

Note: The RED Button serves as a function button in combination with other

buttons explained in your owners manual. This button may not be used to

operate a receiver channel.

NOTE: The Option Button is predetermined and programmed for access to

Time Start, and Temperature Start & Check so it cannot be used for multiple

button operation of any other feature. It will however operate for any single

button programming.

TO ENTER THE PROGRAM MODE:

1. Turn the ignition switch to the “ON” position.

2. Within 10 seconds, Press and release the valet/program switch three

times.

(Siren emits 1 short chirp indicating channel 1 has been entered)

Model 5BCR03

Programming Guide

1 2 3 4 5 6

Indice de contenidos

Pagina 1 - Model 5BCR03

1 of 6128-6997The AX-900 Model has a configurable receiver that allows the transmitter tobe programmed to operate the Lock Unlock functions with one

Pagina 2 - 128-6997

2 of 6128-69973. Within 10 Seconds, Press and hold the button of the first transmitter youwish to control the Lock & Arm feature of your securit

Pagina 3 - 3 of 6

3 of 6128-699713. Within 10 Seconds, Press and hold the unlock button, (or any unusedbutton(s)), of the first transmitter you wish to control Channe

Pagina 4 - 4 of 6

4 of 6128-69971. Enter the transmitter program mode of the receiver channel to bereprogrammed. Using any unused button or combination of buttons, p

Pagina 5 - 5 of 6

5 of 6128-69973. Remove the discharged battery, making note of the location of the + and -contacts shown, and replace with a new type alkaline 1.5 v

Pagina 6 - 6 of 6

6 of 6128-6997Attention: Transmitter Ordering DepartmentImportant: To help us expedite your order, please print all of the informationlegibly and m

Comentarios a estos manuales

Sin comentarios

Audiovox 5BCR03 Manual de usuario

Busca en linea o descarga Manual de usuario para Alarma de carro Audiovox 5BCR03. Audiovox 5BCR03 User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Alarma de carro Audiovox 5BCR03