Audiovox SP-11CDS Manual de usuario descargar pdf (Pagina 6)

4

2

Attach bracket to each side of the unit, using the machine

screws with flat and lock washers (M4x 10).

In the 45 position, use holes 1 and 3' as shown at left.

Mount the unit in place, using four self-tapping screws

(M5 x 12).

Use RTV (silicone sealer) on screw threads and around

the holes to prevent moisture intrusion.

Set the 2 anti-vibration springs to position "45°".

Determine the mounting location, and drill four mounting

holes.

3

PROCEDURE FOR 45° ANGLE INSTALLATION W/O STUDS

Note

If the anti-vibration spring position has been changed and verified for 45° angle mounting (as shown on page 4), start with step 2.

1

Never mount the unit near the fuel tank.

6

NOTE: Use masking tape to cover unused

mounting holes on sides of unit.

MACHINE SCREW WITH FLAT

AND LOCK WASHERS (M4 x 10)

DRILL HOLES 4MM IN DIAMETER

SELF-TAPPING SCREWS

(M5 x 12)

BRACKET

(Left Side)

BRACKET

(Right Side)

BRACKET

(Left Side)

BRACKET

(Right Side)

1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios