Audiovox aps-786t Manual de instalación descargar pdf (Pagina 5)

128-6531

5 of 24

YELLOW START WIRE DETAIL

GREEN Wire: Ignition 2 Output

Connect this wire to the ignition 2 wire from the ignition switch. This wire will show + 12 volts when the

ignition key is turned to the "ON" or "RUN" position and is some cases the "START" or CRANK" position.

This wire will show 0 volts when the key is turned to the "OFF" and "ACCESSORY" positions.

NOTE: See programming information concerning this wire to allow output during the "START" mode.

VIOLET Wire: Accessory Output

Connect this wire to the Accessory wire from the ignition switch. This wire will show + 12 volts when the

ignition switch is turned to the "ACCESSORY" or "ON" and "RUN" positions, and will show 0 volts when the

key is turned to the "OFF" and "START" or "CRANK" positions.

1 2 3 4 5 6 7 8 9 10 ... 23 24

Sin comentarios

Audiovox aps-786t Manual de instalación Pagina 5