Audiovox aps-786t Manual de instalación

128-65311 of 24Model APS 786Installation Manual4 Channel Remote Car StarterWith Full Feature Alarm SystemInstallation InstructionsThis Unit Is Intende

128-653110 of 24Orange Wire: Ground When Armed OutputThis wire provides a 300 mA ground output when the alarm circuit is armed to control the starter

128-653111 of 24Black Wire: Chassis Ground SourceConnect the Black wire to a known vehicle ground source or to a solid clean metal part of the chassi

128-653112 of 24Dark Blue Wire: Delayed 300mA Pulsed Channel 3 OutputThe Dark Blue wire supplies a 300mA ground pulsed output whenever channel three

128-653113 of 2413started under control of the remote start unit. Typically this wire will be used to re-lock the vehicle doors ifthe doors unlock au

128-653114 of 24143 Wire Ground Switched Door Lock Circuits:In this application, the Red wire of the door lock harness provides a ground pulse during

128-653115 of 2415lock/unlock motor legs rest at + 12 volts and switches ground to the door lock/unlock motors, connect theremaining terminal, 87, to

128-653116 of 2416Note: Resistive Circuits, As Well As 4 Wire Polarity Reversal and 5 Wire Alternating 12 VoltDoor Lock Control CircuitsThese applica

128-653117 of 2417To program these selectable features;Action System ResponseTurn ignition on No responsePress and release the valet switch 3 times 1

128-653118 of 24TIMED START PROGRAM:The Remote Start unit has the ability to start the vehicle automatically at timed intervals. This feature isusefu

128-653119 of 24NOTE: Once you've entered the program mode DO NOT allow more than 15 seconds to pass betweensteps, or the programming mode will b

128-65312 of 24The APS-785 Remote Start/Alarm System is designed to be used with Automatic TransmissionVehicles Only! The unit provides a selectable

128-653120 of 244. Connect the Green wire to the (Green) or (Orange/Green) tach input of the Audiovox remote start unit.20TESTING YOUR INSTALLATION:

128-653121 of 2421To test the integrity of the Neutral Start Safety Circuit:1. Set the vehicle parking brake.2. Block the drive wheels to prevent ve

128-653122 of 2422DO NOT RELEASE THIS VEHICLE TO THE CONSUMER UNTIL YOU CONFIRM THEOPERATION OF THE NEUTRAL SAFETY START FEATURE.KEY IN SENSOR CIRCUIT

128-653123 of 2423METHOD 2To connect to the key in sensor circuit as shown for method 2:A. Locate the control wire that connects the drivers door pin

128-653124 of 24© 2003 Audiovox Electronics Corp., Hauppauge, N.Y. 11788 128-6531

128-65313 of 24THE RECEIVER/ANTENNA ASSEMBLY:The Superheterodyne Receiver Antenna Assembly provided with this unit allows routing from below thedash b

128-65314 of 244WIRING THE 6 PIN MAIN POWER HARNESS:RED w/ WHITE Trace Wire: + 12 volts Battery 1 SourceConnect this wire to a + 12 VDC constant sour

128-65315 of 24YELLOW START WIRE DETAIL5GREEN Wire: Ignition 2 OutputConnect this wire to the ignition 2 wire from the ignition switch. This wire wi

128-65316 of 24WIRING CONNECTIONS: Multi Pin Accessory Input/Output HarnessWhite w/ Red Trace Wire: Parking Light Flasher FeedThis wire is the common

128-65317 of 24Purple Wire: (+) Door Trigger InputIf the vehicle's door courtesy light switches + 12 volts when the door is opened, (Some Fords a

128-65318 of 24General Motors VATS By-Pass DiagramLight Blue Wire: Ignition 3 OutputThis wire provides a 300mA ground output that becomes active 3 s

128-65319 of 24Green w/ White trace Wire: Entry Illumination Ground OutputThis wire provides a 30 second ground output (300 mA Max.) whenever the rem