Audiovox PRO 9644aUGH Manual de usuario descargar pdf (Pagina 11)

1. 8 PIN MAIN HARNESS, CONTINUED

BROWN - Negative Door Input (-)

Locate the vehicle’s dome light or door pin switch wire.

Verification: This wire will register ground (NEG) when the door is opened and the interior light is on. This

wire will register positive voltage when the door is closed and the interior light is off.

Connect the BROWN wire to the vehicle’s negative door input wire(s).

NOTE: Certain vehicles may require multiple connections. Refer to vehicle application guide

ORANGE - Armed Output (-) 500mA

This wire will show ground when the system is armed. This wire is used for controlling a starter interrupt relay,

window modules or other additional sensors.

2. 6 PIN HARNESS

DK GREEN - Instant Trigger Input (-)

This wire is a ground input for an external sensor, trunk pin or secondary pin switch.

Verification: This wire when connected will trigger the security system

BLACK/WHITE - Horn Output (-) 1Amp

Locate the vehicle’s horn wire at the steering column.

Verification: This wire will register at positive voltage and register ground when the horn switch is pressed.

Connect the BLACK/WHITE wire to the vehicle’s horn wire.

LT GREEN - Hood Pin Input (-)

Install the supplied Hood Pin Switch and connect to the LT GREEN wire.

Verification: This wire when connected will register ground when the vehicle's hood is opened.

Connect the LT GREEN wire to the hood pin.

NOTE: Be sure to loom the wire, and seal the grommet.

GREEN/WHITE - Illuminated Entry Output (-) 300mA

This wire provides a 300mA output for 30 seconds when the system is disarmed and a continuous output

when the system is triggered.

Locate the vehicle’s dome light or pin switch wire.

Verification: This wire will register positive voltage or ground when the vehicle's dome light is turned ON.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Sin comentarios

Audiovox PRO 9644aUGH Manual de usuario Pagina 11