Audiovox PRO 9644aUGH Manual de usuario descargar pdf (Pagina 15)

RED - Lock Output (-)

GREEN - Unlock Output (-)

RED/BLACK - 2nd Door Unlock Output

One Wire Negative Multiplexed and One Wire Negative Multiplexed with 2-step Unlock Feature:

All Door Lock and Unlock: Locate the lock / unlock wire at the vehicle’s lock / unlock switch.

Verification: This wire will show variable ground when the switch is activated. Please consult the Vehicle

Wire Color and Location Chart for specific resistor values for the vehicle.

Driver’s Door Unlock: Locate the unlock motor wire directly from the actuator inside the driver’s door.

Verification: This wire will rest at ground and register positive voltage when the driver’s door is unlocked.

Connect the RED and GREEN or RED/BLACK wires shown in the diagram below using (2) SPDT relays (not

supplied).

Note: When adding the 2 step unlock feature the RED/BLACK 2nd door unlock wire will be used to unlock all

vehicle doors on the second press of unlock. An additional SPDT relay (not supplied) is required. Connect

the relay as shown in the diagram below to unlock the driver’s door on the first press of unlock.

Lock

Unlock

87a

Vehicle Door Lock

Control Relays

RED (-) Lock Output

GREEN (-) Unlock Output o

RED/BLACK 2nd Unlock

Output for 2 Step Unlock

For 2 Step Unlock:

Fused +12 Volt

Battery Souce

GREEN (-) Unlock Output

From Keyless Entry

Module or Door

Unlock Relay

Drivers Door

Unlock Motor Wire

Cut

Multiplex Locks:

87a

Fused +12 Volt

Battery Source

Ground

Resistor

4. 3 PIN DOOR LOCK HARNESS, CONTINUED

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Sin comentarios

Audiovox PRO 9644aUGH Manual de usuario Pagina 15