Audiovox PRO 9644aUGH Manual de usuario Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 24
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
12
2. 6 PIN HARNESS, CONTINUED
DK BLUE - Trunk Release Output (-)
This wire provides a 500mA negative output capable of driving relays. For Control of optional accessories
such as trunk release.
To Activate press and hold UNLOCK for 2 seconds.
Locate the vehicle’s trunk release wire at the trunk release switch.
Verification: This wire will register either positive voltage or ground when the trunk release is activated.
3. 5 PIN HARNESS
BLUE - Trunk Shunt Input (+)
This wire when activated will shunt all security zones for 60 seconds or until cleared.
RED - Disarm Input (+/-)
This wire will DISARM the security system when a POS or NEG pulse is applied to it from an external device such
as the vehicle's factory unlock motor wire.
GREEN - Arm Input (+/-)
This wire will ARM the security system when a POS or NEG pulse is applied to it from an external device such as
the vehicle's factory lock motor wire.
RED/BLACK - Disarm Input 2 (+/-)
This wire will prevent the system from disarming the security system when a POS or NEG pulse is applied to it
from an external device. This will prevent the system from disarming if it is pulsed at the same time as the RED
(Disarm Input) wire.
For example: To prevent the system from disarming from the switch on the door. Connect this wire to the unlock
switch or passenger unlock motor wire
NOTE: Only required if using the factory keyless entry transmitter to ARM/DISARM this system.
GREEN/BLACK - Arm Input 2 (+/-)
This wire will prevent the system from arming the security system when a POS or NEG pulse is applied to it from
an external device. This will prevent the system from disarming if it is pulsed at the same time as the GREEN
(Arm Input) wire.
For example: To prevent the system from disarming from the switch on the door. Connect this wire to the unlock
switch or passenger lock motor wire
NOTE: Only required if using the factory keyless entry transmitter to ARM/DISARM this system.
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Comentarios a estos manuales

Sin comentarios