Audiovox PRO 9644aUGH Manual de usuario descargar pdf (Pagina 17)

RED - Lock Output (-)

GREEN - Unlock Output (-)

RED/BLACK - 2nd Door Unlock Output

Reverse Polarity (5-Wire Door locks) and Reverse Polarity with 2-step Unlock

All Door Lock and Unlock: Locate the lock / unlock wire at the vehicle’s lock / unlock switch.

Verification: These wires will rest at ground and register positive voltage when the lock and unlock switches

are activated.

Driver’s Door Unlock: Locate the unlock motor wire directly from the actuator inside the driver’s door.

Verification: This wire will rest at ground and register positive voltage when the driver’s door is unlocked.

Connect the RED and GREEN or RED/BLACK wires shown in the diagram below using (2) SPDT relays (not

supplied).

Note: When adding the 2 step unlock feature the RED/BLACK 2nd door unlock wire will be used to unlock all

vehicle doors on the second press of unlock. An additional SPDT relay (not supplied) is required. Connect

the relays as shown in the diagram below to unlock the driver’s door on the first press of unlock.

Lock

Unlock

87a

Fused +12 Volt

Battery Souce

Fused +12 Volt

Battery Souce

RED (-) Lock Output

GREEN (-) Unlock Output or

RED/BLACK 2nd Unlock

Output for 2 Step Unlock

or 2 Step Unlock:

Fused +12 Volt

Battery Souce

GREEN (-) Unlock Output

From Keyless Entry

Module or Door

Unlock Relay

Drivers Door

Unlock Motor Wire

Cut

Reverse Polarity Locks:

Cut

To Door Lock Motor

4. 3 PIN DOOR LOCK HARNESS, CONTINUED

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Sin comentarios

Audiovox PRO 9644aUGH Manual de usuario Pagina 17