Audiovox PRO 9644aUGH Manual de usuario descargar pdf (Pagina 3)

SETUP & PROGRAMMING - CONSUMER MODE

Consumer Mode Transmitter Programming Bank

1. Turn the ignition ON.

2. Press and release the override button 3 times.

3. The system will chirp 1 time.

4. Press the lock button of each transmitter you wish to program.

5. The system will respond with 1 chirp for each accepted transmitter.

6. Turn the ignition OFF to exit transmitter programming.

7. The system will chirp 2 times to confirm exit.

Note: This system has 1 button programming which programs all channels of the transmitter to the

system at once.

Consumer Mode Feature Programming Bank - No Transmitters

1. Turn the ignition ON.

2. Press and release the override button 3 times, the system will chirp 1 time.

3. Turn the ignition OFF, the system will chirp 2 times.

4. Turn the ignition ON, the system will chirp one time indicating option #1 in the feature bank. The

LED will flash the current setting for the option.

5. Use the override button to scroll through the selections in the feature bank, the system will chirp to

match the feature number.

6. Press the programming button on the module to change the desired feature. The LED will flash

indicating the features setting.

7. Turn the ignition OFF to exit programming, the system will chirp 1 time to confirm exit.

Consumer Mode Feature Programming Bank - With Transmitters

1. Turn the ignition ON.

2. Press and release the override button 3 times, the system will chirp 1 time.

3. Turn the ignition OFF, the system will chirp 2 times.

4. Turn the ignition ON, the system will chirp one time indicating option #1 in the feature bank. The

LED will flash the current setting for the option.

5. Use the CAR FIND/PANIC button to scroll through the selections in the feature bank, the system will

chirp to match the feature number.

6. Press the LOCK button to change the desired feature. The LED will flash indicating the changed

feature.

7. Turn the ignition OFF to exit programming, the system will chirp 1 time to confirm exit.

Defaulting the Features in the Feature Programming Bank

1. Turn the ignition ON.

2. Press and release the override button 3 times, the system will chirp 1 time.

4. Press the programming button on the module, the system will chirp 4 times indicating the features

have been defaulted.

NOTE: The system will remain in programming mode as long as the ignition is on, there is no

time limit. To exit programming turn the IGNITION OFF.

1 2 3 4 5 6 7 8 ... 23 24

Sin comentarios

Audiovox PRO 9644aUGH Manual de usuario Pagina 3